ND Filter vs. Polarizer: When to Use Each One for Better Photos
Aug 30, 2023TikTok's Teenage Filter Has Creators in Their Feels
Aug 25, 2023Portals To the Center of the Earth: A Review of Josephine Pryde’s “The Vibrating Slab” at The Art Institute of Chicago
Aug 22, 2023Lubricants Market Size, Outlook, Prominent Players, Share, Challenges and Forecast 2031
Aug 11, 2023Promotion Council For Zero Emission Chargers For Ships Established
Jul 29, 2023Introduction of India power battery standard IS 16893
By
Published
Overview:
Recently Automotive Industry Standards Committee (AISC) released standard AIS-156 and AIS-038 (Rev.02) Amendment 3. The test objects of AIS-156 and AIS-038 are REESS (Rechargeable Energy Storage System) for automobiles, and the new edition adds that the cells used in REESS should pass tests of IS 16893 Part 2 and Part 3, and at least 1 charge-discharge cycle data should be provided. The following is a brief introduction to the test requirements of IS 16893 Part 2 and Part 3.
IS 16893 Part2:
IS 16893 is apply to the secondary lithium-ion cell used in electrically propelled road vehicles propulsion. Part 2 is about the test of reliability and abuse. It is consistent with IEC 62660-2: 2010 “Secondary lithium-ion cells used in electrically propelled road vehicles propulsion – Part 2: test of reliability and abuse” published by the International Electrotechnical Commission (IEC). The test items are: capacity check, vibration, mechanical shock, crush, high-temperature endurance, temperature cycling, external short-circuit, overcharging and forced discharging. Among them are the following key test items:
The items above are about cell performance. They require high performance of cell materials, like the separator. Therefore manufacturers should pay much attention to them
The above three tests require extra attention to the safety performance of the cell, especially the safety of the internal materials, such as the diaphragm.
IS 16893 Part3:
IS 16893 Part 3 is about safety requirements. It is consistent with IEC 62660-3: 2016 “Secondary lithium-ion cells used in electrically propelled road vehicles propulsion – Part 3: safety requirements”. The test items are: capacity check, vibration, mechanical shock, crush, high-temperature endurance, temperature cycling, overcharging, forced discharging and forced internal short-circuit. The following items are important.
The test method of forced internal short-circuit refers to IEC 62619.
Warm Tips:
It is worth noting that although IS 16893 Part 2 and IS 16893 Part 3 have some of the same test items, the verdicts are not the same. Part 2 needs to assess the reliability of the cells, collect the basic data of reliability and abuse behavior. The test report needs to record the current, voltage and temperature data and describe the test results of the cells, and there is no requirement to determine whether the test results are passed or not. However, Part 3 specifies the conditions for passing the test, such as the cell cannot catch fire and explode during the test, if not, the test will fail.
If you have any other questions about this standard and the test application, please feel free to contact our customer service or sales.
Article Source: https://www.un383mcm.com/news/introduction-of-india-power-battery-standard-is-16893/
Media ContactCompany Name: Guangzhou MCM Certification Testing Co.,Ltd.Email: Send EmailPhone: 13622887960Country: ChinaWebsite: https://www.un383mcm.com/
US and Chinese officials will hold a fresh round of talks on the third day of a visit by US Commerce Secretary Gina Raimondo...
Free Voters leader Hubert Aiwanger, who allegedly produced a flyer mocking Holocaust victims as a teenager - Copyright AFP CHRISTOF STACHEA powerful German state...
Toyota said it halted operations at 12 of its 14 factories in Japan due to a system glitch, but that it did not appear...
Streets were flooded in parts of Cuba as Idalia passed nearby - Copyright POOL/AFP Andy WongResidents along Florida’s west coast were under orders to...
Overview:IS 16893 Part2:The above three tests require extra attention to the safety performance of the cell, especially the safety of the internal materials, such as the diaphragm.IS 16893 Part3:Warm Tips:Company Name:Email:Phone:Country:Website: